Macros
One keys send set of command.
-
eg: One key command for rectangle, circle, move, rotate
-
eg: One key send 0, 0, Enter for draw a 100x100 rectangle
-
eg: Right keyboard for numpad for rotate 45 degree
Macros - Send String
One key to send 30-40 character on BLE mode.
-
eg: Type your email: vexc@vexc-how-design.com and then enter.
-
eg: Type your phone number: +44 7828 046858 and the tab, save time to fill form.
-
eg: Type website address and then enter.
Quick Start
Latest Update: 2022-04-20
Connect with USB mode
Connect with BLE mode
Connect with other Bluetooth devices
Switch to different devices
Connect with USB mode
2021 Version
Flash with UF2 file with VHD version.
Plug in a magnetic USB cable with left keyboard and your Mac/PC.
Done.
Optional - Tap "USB_SEL" on adjust layer.
2020 Version
Insert AAA Battery for right keyboard and turn on it.
Plug in a magnetic USB cable with left keyboard and your Mac/PC.
Done.
Optional - Tap "USB_SEL" on adjust layer.
Connect with BLE mode
2021 Version
Turn on the right keyboard first.
Then turn on the left keyboard.
Go to Mac/Bluetooth or iPhone/Bluetooth or other devices/Bluetooth.
Tap "Designer Keyboard" on Mac/PC/iPhone.
Tap "Pair" on Mac/PC/iPhone.
Done.
2020 Version
Insert AAA Battery for right keyboard and turn on it first.
And then insert AAA Battery for left keyboard and turn on it.
Tap "BLE_SEL" and "ADV_ID0" on adjust layer.
Go to Mac/Bluetooth or iPhone/Bluetooth or other devices/Bluetooth.
Tap "Designer Keyboard" on Mac/PC/iPhone.
Tap "Pair" on Mac/PC/iPhone.
Done.
Connect/Pair with other Bluetooth devices
If you conecnted Bluetooth Device 1.
Hold "ADV_ID1" on adjust layer for Bluetooth Device 2.
Go to Mac/Bluetooth or iPhone/Bluetooth or other devices/Bluetooth.
Tap "Designer Keyboard".
Tap "Pair".
Done.
Switch to different devices
Switch to USB device
Plug in a magnetic USB cable with left keyboard and your Mac/PC.
Tap "USB_SEL" on adjust layer.
Done.
Switch to BLE device
Tap "BLE_SEL" on adjust layer.
Hold "ADV_ID0" on adjust layer for switching to Bluetooth Device 1.
Hold "ADV_ID1" on adjust layer for switching to Bluetooth Device 2.
Hold "ADV_ID2" on adjust layer for switching to Bluetooth Device 3.
And so on.5
Charger your Designer Keyboard (2021 Version)
Plug in a magnetic USB cable with Left or Right keyboard.
It should take 3-4 hours for full chargering.
The battery lift is up to 175 days(6 months).
Check my battery level (2021 Version)
Tap BATT_LV on adjust layer.
If It shows near 3900-4000 mV, which means that it is 90-100% of battery.
If It shows near 3000 mV, which means that it is 10-20% of battery, you should charger your keyboard.